WebWhen I changed the CTCSS frequency for the memory channel, performance became based on that one new value for both Tx and Rx. As an ultimate test for this, I changed … WebNote that when the transmit CTCSS tone is changed, the receive CTCSS tone does not change. TX = 167.56250 RX = 167.56250 R = 74.4 T = 74.4 FM 16K TEK 5 FM Figure 10-93 Basic Modulation Setting 14. The available modulation types are AM, FM, and NB. To change the type, press ENT when the selection outline is around the value.

YAESU, FT-70DR, Transceivers HT Dual Band 2m-70cm, FT70DR

http://sonomacountyradioamateurs.com/wp/irlp/frs-gmrs/frs-gmrs-activity-in-sonoma-county/ WebIt work and there is no problem. Do this, just ensure Offset is 0 or SFT-d is off. Never had an issue. You need to save both a Receive and a Transmit (if you have English voice it will say “Receiving memory” when you save the receive CTCSS and “Transmitting memory” when you save transmit CTCSS.) iom in medicine

Understanding CTCSS and DCS - YouTube

WebIf there is an RX CTCSS column in the programmer for your radio, this is the value used by the radio to block signals when TSql is engaged. DCS - The digital tone of the DCS … WebAM/FM - CTCSS / DCS ( RX / TX getrennt einstellbar ) VOX Mikrofon im Lieferumfang ; Für KFZ 12 V / 24 V DC ; Abmessungen 126 x 140 x 39 mm inkl. Knöpfen und Buchsen (B x T x H) ... Dieser Artikel: MAAS KCB-4000 CB Mobilfunkgerät - Multinorm - VOX - CTCSS - DCS … WebRx CTCSS: This column has two uses depending on how Tone Mode is set and the radio's manufacturer and age. In newer radios, this column AND CTCSS will become active when Tone Mode is set to TSql. If that is the case, Rx CTCSS is the value that the radio uses to block incoming signals. (It's the tone FROM the repeater). ontario breeding bird atlas codes